| Certification: | ISO3834 |
|---|---|
| Wall Thickness: | 2.5mm |
| Installation: | Hidden Type |
| Material: | Stainless Steel |
| Type: | SMC Water Tank |
| Volume: | 1-100mt |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 1-100t/h Water Treatment Production Line - Pretreatment
Quartz Sand Filter: A kind of sealed container with built-in sand filter made up of 1Cr18NiTi stainless steel. The untreated liquid is only allowed to pass through the filter stick to achieve the objective of clarifying. Able to be applied in petroleum industry, pharmacy industry, brew manufacturing industry, beverage industry, etc., it is the ideal equipment to make excellent water.
Water Purifier: Suitable for the purification of the drinking water and able to remove the heterochrosis, peculiar smell, metallic materials (mercury, lead, zinc, iron, manganese, chrome, etc.) and high polymer compounds (hydride, sulfide, residual chlorine, etc.), it is the ideal water purifying equipment in drinking water, food, beverage, pharmacy and chemical industries.
Sodium Ion Exchanger: Applied to reduce the water hardness. The raw water is softened through the exchanger; the magnesium, calcium and positive ion are exchanged with the sodium ion in the water exchanging agent; then the raw water will be softened as soft water with a little of calcium, magnesium and salt which can be used as boiler feed water and industrial water. As the sodium ion has solubility in the water, it will not form a hard scale and will be easily removed. The water in sodium ion exchanger shall be clarified and filtered and there will be no suspended matter. After softening through the exchanger, the water has a residual hardness no more than 0.03mg/l.
| Item No | Testing item | Testing requirements | Testing result | Comment |
| 1 | Pressure testing | To test the water pressure after installed the equipment, when the pressure reads 0.5MPa, to make it down to 0.4MPa for 30 minutes, pressure drop ≤0.05MPa. | ||
| 2 | Body, up and lower cover pressure testing | When finish installation of the body, up and lower cover, with 0.5MPa pressure it keeps 30 minutes, no leakage. | ||
| 3 | Appearance | It's clean and tidy, no rust, oil or dirty. |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}