The machine is a kind of equipment recently introduced by our company to produce PET plastic hollow vessels. With the features of saving energy, less occupation, low investment, quick effect and reasonable structure, it is expansively applied in packaging products of food, drugs, cosmetics, pesticides, chemical agents and soft beverage.
Features:
1.The host machine is equipped with micro computer program controller, convenient for operation.
2.The heater adopts far infrared ray heating tube controlled by inlet controllable silicon; the transmission part adopts three-phrase motor and is driven by transducer.
3.The stretching part of the seal adopts two cylinders both on the left and right; the stretching length is stepless. The delay time of the blowing can be freely adjusted, beneficial for the product molding.
4. The waste gas within the machine is discharged through the muffler, reducing the noise.
The host machine is equipped with air reservoir as well as high and low pressure reducing valves
JR series full-automatic blowing machine can blow hollow plastic vessels of various calibers. The product quality is stable; the structure is reasonable; it has small volume, less energy consumption, convenient operation and maintenance. All the mechanical parts of the JR series full-automatic blowing machine are treated with high technology, processed elaborately and assembled delicately to meet the technical requirements of various aspects. The moving parts adopt boundary lubricating bearing and straight line guide rail pair (Japanese slider) connection; mechanical collision adopt buffer (Japanese), thus the mechanical noise is low, the fault rate is low and the service life is long. The unique blowing machine design make it has a quite high yield rate. The operation of JR series machine is fully controlled by computer; the action is accurate and reliable. The humane operation and machine running monitoring are realized through human-machine interface.
Main configuration: |
Pneumatic pieces |
electromagnetic |
SMC from Japan |
Air cylinder |
electric pieces |
Control computer |
LG from Korea |
Person-machine interface |
LG from Korea |
Relayor |
OMRON from Japan |
infrared ray thermometer |
America raytek |
Remark |
All the electric pieces of this machine are from international high-tech products. |
PARAMETER: |
Model |
JR-60SC |
Output |
According to different bottle |
5400PCS/H |
Bottle specification |
Bottle body diameter |
20mm-100mm |
Bottle body height |
50mm-350mm |
Bottlemouth diameter |
15mm-38mm |
Mould |
cavity |
4cavities |
Thickness |
240mm |
Effective aera |
500*500mm |
Main motor power |
voltage |
380v 3Phase /220v 3Phase 50/60HZ |
power capacity |
49kw |
Using power |
14kw |
Air source |
Low pressure compressor |
1.6m3/min 1.0MPa |
High pressure compressor |
1.0m3/min 3.0MPa 2set |
Cooling dryer |
2.0m3/min 3.0MPa 1set |
Cooling water |
Water quantity |
15L/min |
Main machine dimension |
Length*Width*Height |
1908*1858*1920mm |
Weight |
3600kg |
Auxiliary
(auto perform feeder) |
Dimension |
276*106*186mm |
Weight |
250kg |
Raw Material |
|
PET |